- Rental
- NDT & Inspection
- Railway NDT
- Railway NDT
- Ultrasonic Test Equipment
- Blocks
- Probes
- Probes
- Phoenix 0° Probe - Single Crystal, Type: RSC 2.5/15
- Phoenix 0° Probe - Twin Crystal, Type: RTC 5/10
- *Phoenix 38° Probe - Single Crystal, Type: RMSW 2.5/15/38
- *Phoenix 40° Probe - Single Crystal, Type: RMSW 2.5/15/40
- Phoenix 45° Probe - Single Crystal, Type: RMSW 2.5/15/45
- Phoenix 45° Probe - Single Crystal, Type: RMSW 2.5/15/45T
- Phoenix 60° Probe - Single Crystal, Type: RMSW 2.5/15/60
- Phoenix 70° Probe - Single Crystal, Type: RMSW 2.5/15/70
- Phoenix 38° Probe (Sub-minature) Single Crystal, Type: RSSW 2.5/10/38
- Phoenix 40° Probe (Sub-minature) Single Crystal
- Phoenix 45° Probe (Sub-minature) Single Crystal, Type: RSSW 2.5/10/45
- Phoenix 70° Probe (Sub-minature) Single Crystal, Type: RSSW 2.5/10/70
- Phoenix 38° Probe (Sub-minature) Single Crystal, Type: RSSW 4.0/10/38
- Phoenix 40° Probe (Sub-minature) Single Crystal, Type: RSSW 4.0/10/40
- Phoenix 45° Probe (Sub-minature) Single Crystal, Type: RSSW 4.0/10/45
- Phoenix 70° Probe (Sub-minature) Single Crystal, Type: RSSW 4.0/10/70
- Probe Leads, BNC/Subvis - Single
- Probe Leads, BNC/Subvis - Twin
- Probe Lead, BNC/BNC - Single (Heavy Duty)
- Probe Lead, BNC/BNC - Single (Heavy Duty)
- Thermit Weld Test Rig (Cat No 0082/998000)
- Geismar Calipers
- STD2 Calibration Block
- CB91M Calibration Block
- CB87 Calibration Block
- CB87 Calibration Block
- CB87 Calibration Block
- Accessories
- Ultrasonic test quipment
- Accessories
- Batteries
- Proceq
- Consumables
- Service and Calibration
- Sercal
- Support
37DL Plus Temperature Compensation Mode
To accurately measure material thickness at elevated temperatures has always been difficult. A calibration carried out at room temp is not ideally suitable for measuring on material of a higher temp, Unless the gauge has Temperature Compensation or an extensive multiple cal is preformed.
Oceanscan’s 37DL Plus gauges have this built in and are supplied with a high temp probe. The ideal way to accurately perform thickness gauging across a wide range of temperatures.
Temperature compensation allows the 37DL Plus to compensated for the change in sound velocity due to temperature.The sound velocity in Steel changes approximately 1% per 1000F (550C) change in temperature as recommended by ASME Standard E 797-95. Read more...
Request for Information
Take advantage of over 50 years combined experience from our sales team.