Phoenix 0° Probe - Single Crystal, Type: RSC 2.5/15
(2.5MHz, 15mm Crystal, Subvis Connector),

Call for cost and availability

• ALL THE ABOVE PROBES ARE SUPPLIED WITH UKAS CERTIFICATION
• Subvis connectors (small brass screw-on type)
• Manufactured in accordance with EN 12668-2:2000.

* These probes can be supplied with or without cut out (Cusp).
(please specify when ordering).
The cusp is necessary when testing of step joints.

*Phoenix 38° Probe - Single Crystal, Type: RMSW 2.5/15/38

                   (2.5MHz, 15mm Crystal, rear entry, subvis connector)

Call for cost and availability

• ALL THE ABOVE PROBES ARE SUPPLIED WITH UKAS CERTIFICATION
• Subvis connectors (small brass screw-on type)
• Manufactured in accordance with EN 12668-2:2000.

* These probes can be supplied with or without cut out (Cusp). 
(please specify when ordering). 
The cusp is necessary when testing of step joints.

*Phoenix 38° Probe - Single Crystal, Type: RMSW 2.5/15/38

Call for cost and availability

• ALL THE ABOVE PROBES ARE SUPPLIED WITH UKAS CERTIFICATION
• Subvis connectors (small brass screw-on type)
• Manufactured in accordance with EN 12668-2:2000.

* These probes can be supplied with or without cut out (Cusp). 
(please specify when ordering). 
The cusp is necessary when testing of step joints.

*Phoenix 40° Probe - Single Crystal, Type: RMSW 2.5/15/40

Call for cost and availability

• ALL THE ABOVE PROBES ARE SUPPLIED WITH UKAS CERTIFICATION
• Subvis connectors (small brass screw-on type)
• Manufactured in accordance with EN 12668-2:2000.

* These probes can be supplied with or without cut out (Cusp). 
(please specify when ordering). 
The cusp is necessary when testing of step joints.

Phoenix 45° Probe - Single Crystal, Type: RMSW 2.5/15/45

Call for cost and availability

• ALL THE ABOVE PROBES ARE SUPPLIED WITH UKAS CERTIFICATION
• Subvis connectors (small brass screw-on type)
• Manufactured in accordance with EN 12668-2:2000.

* These probes can be supplied with or without cut out (Cusp). 
(please specify when ordering). 
The cusp is necessary when testing of step joints.

Phoenix 45° Probe - Single Crystal, Type: RMSW 2.5/15/45T

Call for cost and availability

• ALL THE ABOVE PROBES ARE SUPPLIED WITH UKAS CERTIFICATION
• Subvis connectors (small brass screw-on type)
• Manufactured in accordance with EN 12668-2:2000.

* These probes can be supplied with or without cut out (Cusp). 
(please specify when ordering). 
The cusp is necessary when testing of step joints.

Phoenix 60° Probe - Single Crystal, Type: RMSW 2.5/15/60

Call for cost and availability

• ALL THE ABOVE PROBES ARE SUPPLIED WITH UKAS CERTIFICATION
• Subvis connectors (small brass screw-on type)
• Manufactured in accordance with EN 12668-2:2000.

* These probes can be supplied with or without cut out (Cusp). 
(please specify when ordering). 
The cusp is necessary when testing of step joints.

Phoenix 70° Probe - Single Crystal, Type: RMSW 2.5/15/70

Call for cost and availability

• ALL THE ABOVE PROBES ARE SUPPLIED WITH UKAS CERTIFICATION
• Subvis connectors (small brass screw-on type)
• Manufactured in accordance with EN 12668-2:2000.

* These probes can be supplied with or without cut out (Cusp). 
(please specify when ordering). 
The cusp is necessary when testing of step joints.

Phoenix 38° Probe (Sub-minature) Single Crystal, Type: RSSW 2.5/10/38

Call for cost and availability

• ALL THE ABOVE PROBES ARE SUPPLIED WITH UKAS CERTIFICATION
• Subvis connectors (small brass screw-on type)
• Manufactured in accordance with EN 12668-2:2000.

* These probes can be supplied with or without cut out (Cusp). 
(please specify when ordering). 
The cusp is necessary when testing of step joints.

Phoenix 40° Probe (Sub-minature) Single Crystal

Call for cost and availability

  
• ALL THE ABOVE PROBES ARE SUPPLIED WITH UKAS CERTIFICATION
• Subvis connectors (small brass screw-on type)
• Manufactured in accordance with EN 12668-2:2000.

* These probes can be supplied with or without cut out (Cusp).

(please specify when ordering). 

The cusp is necessary when testing of step joints.

Phoenix 45° Probe (Sub-minature) Single Crystal, Type: RSSW 2.5/10/45

Call for cost and availability

• ALL THE ABOVE PROBES ARE SUPPLIED WITH UKAS CERTIFICATION
• Subvis connectors (small brass screw-on type)
• Manufactured in accordance with EN 12668-2:2000.

* These probes can be supplied with or without cut out (Cusp). 
(please specify when ordering). 
The cusp is necessary when testing of step joints.

Phoenix 70° Probe (Sub-minature) Single Crystal, Type: RSSW 2.5/10/70

Call for cost and availability

• ALL THE ABOVE PROBES ARE SUPPLIED WITH UKAS CERTIFICATION
• Subvis connectors (small brass screw-on type)
• Manufactured in accordance with EN 12668-2:2000.

* These probes can be supplied with or without cut out (Cusp). 
(please specify when ordering). 
The cusp is necessary when testing of step joints.

Phoenix 38° Probe (Sub-minature) Single Crystal, Type: RSSW 4.0/10/38

Call for cost and availability

• ALL THE ABOVE PROBES ARE SUPPLIED WITH UKAS CERTIFICATION
• Subvis connectors (small brass screw-on type)
• Manufactured in accordance with EN 12668-2:2000.

* These probes can be supplied with or without cut out (Cusp). 
(please specify when ordering). 
The cusp is necessary when testing of step joints.

Phoenix 40° Probe (Sub-minature) Single Crystal, Type: RSSW 4.0/10/40

Call for cost and availability

• ALL THE ABOVE PROBES ARE SUPPLIED WITH UKAS CERTIFICATION
• Subvis connectors (small brass screw-on type)
• Manufactured in accordance with EN 12668-2:2000.

* These probes can be supplied with or without cut out (Cusp). 
(please specify when ordering). 
The cusp is necessary when testing of step joints.

Phoenix 45° Probe (Sub-minature) Single Crystal, Type: RSSW 4.0/10/45

Call for cost and availability

• ALL THE ABOVE PROBES ARE SUPPLIED WITH UKAS CERTIFICATION
• Subvis connectors (small brass screw-on type)
• Manufactured in accordance with EN 12668-2:2000.

* These probes can be supplied with or without cut out (Cusp). 
(please specify when ordering). 
The cusp is necessary when testing of step joints.

Phoenix 70° Probe (Sub-minature) Single Crystal, Type: RSSW 4.0/10/70

Call for cost and availability

• ALL THE ABOVE PROBES ARE SUPPLIED WITH UKAS CERTIFICATION
• Subvis connectors (small brass screw-on type)
• Manufactured in accordance with EN 12668-2:2000.

* These probes can be supplied with or without cut out (Cusp). 
(please specify when ordering). 
The cusp is necessary when testing of step joints.

Probe Leads, BNC/Subvis - Single

(The above leads are for use with Phoenix Probes and have a small brass screw-on connector at one end)

Probe Leads, BNC/Subvis - Twin

(The above leads are for use with Phoenix Probes and have a small brass screw-on connector at one end)

Probe Lead, BNC/BNC - Single (Heavy Duty) -  0.6M

Probe Lead, BNC/BNC - Single (Heavy Duty) - 1.2M

Thermit Weld Test Rig

Complete with:

• 2 off 45 Degree, 2.5MHz, Single Crystal, 15mm
  1 off 70 Degree, 4.0MHz, Single Crystal,
  Sub-miniature
  2 off Probe Leads, BNC/BNC - Single
  1 off Probe Lead, BNC/Subvis – Single

(Note: These are the normal accessories for use with the Tandem Rig. The 45 Degree probes are a matched pair; this being the requirements with the Tandem Rig)

Geismar Calipers

Sliding caliper, Model N00200.
Ideal for measuring width of rail head,
Width of foot, thickness of web and height of rail.

Complete with traceable Certification

STD2 Calibration Block

For use with:
• Sperry Walking Sticks

Complete with traceable Certification

CB91M Calibration Block

Complete with traceable Certification

CB87 Calibration Block

Complete with traceable Certification