S-LED
Different versions of the S-LED projector have been developed either on batteries or sector. 1 is conform to every aerospace requirement (ASTM E3022-15 / ISO 3059 / NADCAP / AITM6-1001-11 / RRES90061) , 1 without filter for the other NDT applications, including leak detection with fluorescent tracer.
- Undulation of the LED’s current is less than 5% and assimilated to a continuous current, which is requested by ASTM and AITM.
- Advantage : No stroboscopic effect so better durability of the LEDs. - Irradiance stability shortly after turning it on (<3%)
- Fitting of the power supply according to the LED’s temperature
- No loss of power when using the battery
- Permanent control of the current intensity with lights for defectsts - Waterproof according to IP68, resilient to petroleum products, grease remover, passivation.
- Insensitive to electromagnetic fields of an Magnetic Particle Inspection bench (whatever the current form) or demagnetizer
- Reliable and strong design, raw material coming from the automotive industry and components from electrical industry.
- You can have both UV light and white light switched on at the same time to remove any doubt
- Timed functioning:
- Increases the life span of the lamp
- First push : 5mn
- Second push : 100mn
- After the functioning light switches off, if you wait more than 3 seconds and do a pressure the lamp switches off.
- Pressure switch supporting 50 million pushes
- No risk of switching the white light instead of UV thanks to the remoteness of the switches from one another
No functioning light while inspecting to avoid confusing the operator’s vision - Cooling down by natural convection
- A microprocessor manages the lamp and the battery
- Cable is resilient to chemicals
- Still working at 100% of its capacity at 30 degrees. Made to be used up to 50 degrees.
- Automatically switches off when high temperatures are detected to protect itself and the operator
- Option : Supply of the values
Download files